Products for temperature measurement - Temperature transmitter

The task of transmitters is the transformation of the sensor signal into a stable and standardized signal. In the past, transmitters were built using analog technology. In the meantime digital technology has gained acceptance, however, because it offers better measurement accuracy at simultaneously higher flexibility, improve safety and safe costs.

In addition, the measurement accuracy in modern transmitters can be improved by use 'sensor-transmittermatching'. The complete measurement point can be calibrated in a loop (Sensor and transmitter together).

On the one hand, the standardized output signal in the process measurement is a 4...20 mA signal, but also the internationally standardized field buses, such as HART, PROFIBUS and FOUNDATION Fieldbus are used. The HART protocol serves mainly for a more convenient operation in combination with the 4...20 mA analog measured signal. PROFIBUS and FOUNDATION Fieldbus, however, transfer the real measured value digitally without any loss of accuracy and therefore offer cost savings by simplifying the wiring.

MS180 Temperature head transmitter ● Universal PC programmable (PCP) ● 2 wire technology, 4 to 20 mA analogue output ● High accuracy in total ambient temperature range ● Configuration during measurement using configuration kit ● Customer specific measurement range setting ● Wide measurement range, according to requirement MS181 Temperature head transmitter ● Universally PC programmable (PCP) ● Galvanic isolation ● 2 wire technology, 4 to 20 mA analog output ● High accuracy in total ambient temperature range ● Fault signal on sensor break or short circuit ● Configuration during measurement using configuration kit ● Customer specific measurement range setting ● Wide measurement range, according to requirement ● Output simulation MS182 Temperature head transmitter ● Universal settings with HART-protocol ● Operation, visualisation and maintenance via PC or MS182 operating software ● 2 wire technology, 4 to 20 mA analog output ● High accuracy in total ambient temperature range ● Fault signal on sensor break or short circuit ● Ex-Certification ● Galvanic isolation ● Max/Min process value indicator function ● Configuration during measurement using configuration kit ● Wide measurement range, according to requirement ● Analog or digital output ● Customer specific measurement range setting MS183 Temperature head transmitter ● Universal settings with HART-protocol ● Operation,visualisation and maintenance via PC or MS183 operating software ● 2 wire technology, 4 to 20 mA analog output ● High accuracy in total ambient temperature range ● Fault signal on sensor break or short circuit ● Ex-Certification ● Galvanic isolation ● Output simulation or digit ● Customer specific measurement range setting