|
Products for temperature measurement - Temperature transmitter
The task of transmitters is the transformation of the sensor signal into a stable and standardized signal. In the past, transmitters were built using analog technology. In the meantime digital technology has gained acceptance, however, because it offers better measurement accuracy at simultaneously higher flexibility, improve safety and safe costs.
In addition, the measurement accuracy in modern transmitters can be improved by use 'sensor-transmittermatching'. The complete measurement point can be calibrated in a loop (Sensor and transmitter together).
On the one hand, the standardized output signal in the process measurement is a 4...20 mA signal, but also the internationally standardized field buses, such as HART, PROFIBUS and FOUNDATION Fieldbus are used. The HART protocol serves mainly for a more convenient operation in combination with the 4...20 mA analog measured signal. PROFIBUS and FOUNDATION Fieldbus, however, transfer the real measured value digitally without any loss of accuracy and therefore offer cost savings by simplifying the wiring.
MS190 Temperature field transmitter |
¡ñ Universal PC programmable (PCP)
¡ñ 2 wire technology, 4 to 20 mA analogue output
¡ñ Digital display (LED,LCD)
¡ñ High accuracy in total ambient temperature range
¡ñ Configuration during measurement using configuration kit
¡ñ Ex-Certification
¡ñ IP67£¨aluminum alloy casing£©,IP65£¨plastic casing£©
¡ñ Output simulation
¡ñ Customer specific measurement range setting |
MS191 Temperature field transmitter |
¡ñ Universal PC programmable (PCP)
¡ñ Two-wire technology, analog output 4 to 20 mA
¡ñ Digital display (LED,LCD)
¡ñ Highly accurate in entire operating temperature range
¡ñ Configuration during measurement using configuration kit
¡ñ Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
¡ñ Ex-Certification
¡ñ IP67£¨aluminum alloy casing£©,IP65£¨plastic casing£©
¡ñ Galvanic isolation
¡ñ Output simulation |
MS192 Temperature field transmitter |
¡ñ Universal programmable with HART-protocol
¡ñ Two-wire technology, analog output 4 to 20 mA
¡ñ Digital display (LED,LCD)
¡ñ Operation, visualisation and maintenance with PC or MS182 operating software
¡ñ Max/Min process value indicator function
¡ñ Highly accurate in entire operating temperature range
¡ñ Configuration during measurement using a PC or via the HART communication
¡ñ Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
¡ñ Ex-Certification
¡ñ IP67£¨aluminum alloy casing£©,IP65£¨plastic casing£©
¡ñ Galvanic isolation
¡ñ Output simulation or digit |
MS199 Temperature field transmitter |
¡ñ Universally PC programmable (PCP)
¡ñ Only 8V within its whole loop circuit
¡ñ Two-wire technology, analog output 4 to 20 mA
¡ñ LED Display
¡ñ Operation, visualization and maintenance with PC
¡ñ Highly accurate in entire operating temperature range
¡ñ Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
¡ñ Ex-Certification
¡ñ IP67£¨aluminum alloy casing£©,IP65£¨plastic casing£©
¡ñ Galvanic isolation
¡ñ Output simulation |
|
|
|
|